Bose 151 SE Manuel du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Bose 151 SE. Bose 151 SE 17 pages. Environmental speaker

The Bose

151

Mounting procedure

Figure 3

Exploded view of speaker

and mounting bracket

Figure 4

Mounting the brackets

SE Environmental Speakers

1. Remove screw C and lock washer D from the mounting bracket assembly, and remove

part B from part A (Figure 3).

2. Hold bracket part A in position against the wall and mark the left and right round holes for

the mounting hardware (Figure 4). If you plan to feed speaker cord through the wall, mark

the oval speaker cord feed-through hole also.

Mount bracket A with

locking screw on the left.

3. Drill holes using the appropriate drill bits for the wall material. Refer to "Required tools

and materials" on page 3.

Note: If you plan to feed the speaker cord through the bracket, feed the cord through the wall

before mounting the bracket.

4. Mount bracket part A to the wall using the appropriate hardware for wood (G) or concrete

(H and G). Make sure the hole for the bracket locking screw is on your left (Figure 4).

5. Mount bracket part B to the rear of the speaker using two machine screws E and two

lock washers F (Figure 4).

Speaker cord

Mount bracket B with

flat end next to terminals.

Speaker cord