Bose 301 II Series Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Bose 301 II Series. Bose 301 II Series 7 pages.

Imprimer la page

DISASSEMBLY/ASSEMBLY PROCEDURES

Note: Numbers in parenthesis refer to call

outs in figure 1.

1. Front and Side Grille Removal

1.1 Grasp the grille (4) (3) by an edge and

pull it off.

2. Front and Side Grille Replacement

2.1 Line up the grille mounting feet with the

grille attachments (10) on the cabinet and

press the grille onto the cabinet.

3. Woofer Removal / Crossover Access

3.1 Perform procedure 1 first.

3.2 Remove the four screws (12) that

secure the woofer (1) to the cabinet.

3.3 Lift the woofer out of the cabinet and

cut the wires as close as possible to the

woofer terminals.

3.4 The crossover components are located

on the back wall of the cabinet.

4. Woofer Replacement

4.1 Attach the wires to the replacement

woofer (1). See the schematic diagram on

page 5 for the wiring configuration.

4.2 Replace the four screws (12) that

secure the woofer to the cabinet.

5. Tweeter Removal

5.1 Perform procedure 1 first.

5.2 Remove the screw (7) that secures the

tweeter to the tweeter mounting bracket (6).

5.3 Cut the wires as close as possible to

the tweeter terminals.

6. Tweeter Replacement

6.1 Attach the wires to the replacement

tweeter. Refer to the schematic diagram on

page 5 for the wiring configuration.

6.2 Replace the screw (7) that secures the

tweeter to the tweeter mounting bracket (6).

7. Terminal Cup Removal

7.1 Remove the four screws (15) that

secure the terminal cup (16) to the cabinet.

7.2 Cut the wires as close as possible to

the terminal cup.

8. Terminal Cup Replacement

8.1 Attach the wires to the replacement

terminal cup (16). Refer to the schematic

diagram on page 5 for the wiring configura-

tion.

8.2 Replace the four screws (15) that

secure the terminal cup to the cabinet.

9. Vertical Trim Strip Removal

9.1 Grasp an edge of the vertical trim strip

(9) an pull it off.

10. Vertical Trim Strip Replacement

10.1 Line up the vertical trim strip (9) with

the holes in the cabinet and press it into

place.