Reference
Changing the house code settings
Figure 9
Miniature house code
switches
Figure 10
Media center display
window showing switch
positions
26
Each Lifestyle
®
remote control uses a system of matching house codes to communicate with
its corresponding media center. If commands given from your remote ever conflict with those
of another nearby Lifestyle
its remote control(s) by following these steps.
1. Open the remote control battery cover and locate the miniature switches (Figure 9).
2. Change the position of switches 1, 2, 3, or 4 by moving them in the opposite direction
from their current settings. Use a paper clip, ball point pen, or similar object.
3. Replace the battery cover.
4. Lift the media center door and press the All Off button.
5. Press and hold the Store key. The media center display will begin to flash PROGRAM.
6. While holding the Store key, press any key on the remote control. The display stops
flashing and momentarily shows PROGRAM to confirm recognition of a new house code.
The display verifies the house code by showing four rectangles corresponding to the four
switch positions (up or down). See the example in Figure 10.
7. Release the STORE key. The system remains off.
8. If you have additional remote controls, change the switches to match those of the first
remote control. It is not necessary to repeat steps 4-8.
Note: To verify your system's house code, press Store while the system is off. The display
confirms the settings of switches 1-4.
House code switches (1-4)
C
O
M
P
A
N
Y
C
O
M
P
A
N
Y
®
system, you can easily set a new house code for your system and
C
O
N
F
I
D
E
N
T
C
O
N
F
I
D
E
N
T
Shown as set at the
factory: all switches
down.
I
A
L
I
A
L
Imprimer la page