Atlas Copco 2000-2/MF Instructions de réparation - Page 7
Parcourez en ligne ou téléchargez le pdf Instructions de réparation pour {nom_de_la_catégorie} Atlas Copco 2000-2/MF. Atlas Copco 2000-2/MF 8 pages.
Imprimer la page
1
Mounting the
Mount the needle bearing (1).
cylinder
2
Insert the sealing ring (6).
3
Insert the snap die (2), the rubber ring, the
washer, the spring ring, and the drill
spindle (5).
4
Insert the cylinder (3) as shown in
illustration. Insert the percussion body (4)
into the cylinder (3).
1
Assembling the
Mount the bearing (3) and the gasket (5).
reduction gear
2
Insert the pin (6) and the sleeve (7).
3
Mount the sealing ring (1) and the needle
bearing (2).
4
Mount the reduction gear complete with
the reduction gear shaft (8). Insert the disc
springs opposite each other (see illustra-
tion).
5
Mount the axial needle bearing (4).
PN 2000-2/ MF/ MF2/ N/ SMF2/ spec.N
Press the reduction gear wheel (9)
onto the wobble gear drive. The end
play must be 0.05 + 0.03 mm.
Repair Instructions No.176.11/95
3
2
1
2
1
4
5
6
3 4
7
6
5
9
8
PAGE
6
3
4