Bose MediaMate Computer Speakers Manuel du propriétaire - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Bose MediaMate Computer Speakers. Bose MediaMate Computer Speakers 17 pages. Mediamate computer speakers
Également pour Bose MediaMate Computer Speakers : Manuel du propriétaire (16 pages)
- 1. Table of Contents
- 2. Before You Begin
- 3. Unpack the Speakers
- 4. Where to Put Your Mediamate" Speakers
- 5. Connect the Speakers
- 6. How to Connect to the Sound Source
- 7. How to Connect the Power Pack
- 8. How to Use the MIX Control
- 9. When to Use the Headphone Jack
- 10. Troubleshooting
- 11. Warranty Period
- 12. Technical Information
To use the speaker control for volume adjustments
Set the volume control on your sound source or your on-screen
controls at two-thirds
maximum. Then use the control on the
powered speaker to adiust the volume. Turn the knob right to raise
and left to iower the
.
volume (see Figure 5).
The output of sound
sources and sound
cards varies, so you
should experiment to
find the best setting for
your source.
To use your sound
source control for
volume adjustments
Set the volume control
on the powered speaker
to maximum. Then use
the volume control on
your sound source or
your on-screen controls
to make adjustments.
How
to
use
the mix control
The source mixer adjusts the balance of sound coming from each
source, without increasing or decreasing total speaker volume.
Source A is your computer or computer and CD-ROM combina-
tion. Source B is whatever source you connected to AUDIO
INPUTS B.
l
For equal amounts of sound from both sources, set the knob
halfway between Source A and Source B.
l
For more sound from your computer (than from Source B), or to
silence Source B, turn the knob to the left.
l
For more sound from Source B (than from your computer), or to
silence your computer, turn the knob to the right.
When to use the headphone
jack
To listen in private, plug the headphones
into the headphone jack.
This mutes the sound coming from the speakers. Use the volume
control to adjust the headphone volume.
Figure 5
Volume and balance
controls
9
To use the speaker control for volume adjustments
Set the volume control on your sound source or your on-screen
controls at two-thirds maximum. Then use the control on the
powered speaker to adjust the volume. Turn the knob right to raise
and left to lower the
volume (see Figure 5).
The output of sound
sources and sound
cards varies, so you
should experiment to
find the best setting for
your source.
To use your sound
source control for
volume adjustments
Set the volume control
on the powered speaker
to maximum. Then use
the volume control on
your sound source or
your on-screen controls
to make adjustments.
Howtouse
the mix control
The source mixer adjusts the balance of sound coming from each
source, without increasing or decreasing total speaker volume.
Source A is your computer or computer and CD-ROM combina-
tion. Source B is whatever source you connected to AUDIO
INPUTS B.
•
For equal amounts of sound from both sources, set the knob
halfway between Source A and Source B.
•
For more sound from your computer (than from Source B), or to
silence Source B, turn the knob to the left.
•
For more sound from Source B (than from your computer), or to
silence your computer, turn the knob to the right.
When
to
use the headphone jack
To listen in private, plug the headphones into the headphone jack.
This mutes the sound coming from the speakers. Use the volume
control to adjust the headphone volume.
Figure 5
Volume and balance
controls
9