Bose Panaray 402 Series IV Manuel d'installation - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Bose Panaray 402 Series IV. Bose Panaray 402 Series IV 32 pages. Full-range-driver array loudspeakers
Également pour Bose Panaray 402 Series IV : Manuel d'installation (24 pages)
Imprimer la page
- 1. Panaray Series IV Loudspeaker Dimensions
- 2. Series IV Loudspeaker Dimensions
- 3. Panaray 802 Series IV Loudspeaker Mounting Options
- 4. Recommended Power Amplifiers
- 5. Panaray 802 Series IV Loudspeaker Specifications
- 6. Panaray 402 Series IV Loudspeaker Specifications
- 7. Panaray 502 a Series Loudspeaker Specifications
Installation
Attach the bracket to the wall. Follow the instructions provided with the wall bracket.
2.
Choose a position and mounting method consistent with local building codes and regulations. Ensure the mounting
surface and the method of attaching the loudspeaker to the surface is structurally capable of supporting the weight of the
loudspeaker (7.3 kg (16 lb)). A 10:1 safety weight ratio is recommended.
Using the included T3 square drive, remove the plastic inserts on the rear panel of the loudspeaker and attach the
3.
bracket to loudspeaker using only the included M8 x 20 mm screws.
Hang the loudspeaker on the wall-mounted half of the bracket and install the lower carriage bolt removed earlier.
4.
12
M8 x 20 mm
13.6 – 16.3 Nm (10 – 12 ft-lb)
pro.Bose.com