Bose Panaray 502A Informations techniques - Page 2
Parcourez en ligne ou téléchargez le pdf Informations techniques pour {nom_de_la_catégorie} Bose Panaray 502A. Bose Panaray 502A 4 pages. Full-range-driver array loudspeakers
Également pour Bose Panaray 502A : Manuel d'installation (12 pages), Manuel (4 pages), Manuel d'installation (24 pages), Manuel d'installation (32 pages)
Imprimer la page
System Description
®
®
®
The Bose
Panaray
502
fully modular system which
represents significant advances in
loudspeaker array, low-frequency
transducer, and system control
technology. Components of the basic
Panaray 502 system, which are sold
separately, include two 502 A con-
trolled arrays, one 502 B Acousti-
mass
enclosure, and one Panaray
®
system digital controller. This basic
system provides up to 122dB peak
SPL (at 1 meter, driven with maxi-
mum recommended amplifier power)
over the 55Hz to 15kHz range.
Extensive research has yielded new
technology in array design which,
using a proprietary arrangement of
Bose 4.5-inch full-range drivers,
results in tightly controlled horizontal
and vertical beamwidth, and ex-
tremely smooth band-to-band
directivity. The system also features
a new, compact low-frequency
enclosure using Bose-patented
Acoustimass technology. The
Panaray 502 system is a highly
aesthetic voice or music sound
reinforcement system for permanent
audio installations in theaters,
auditoriums, churches, nightclubs,
transportation facilities, and other
places where people gather to be
entertained, enlightened, or informed.
Component Description
The 502 A controlled array is a mid-
to high-frequency component of the
Panaray 502 system. It features five
new-design 4.5" (11.4 cm) helical
voice coil drivers in a slim, elegantly
designed enclosure. The result is
natural sounding, extremely even
coverage at all frequencies over the
entire listening area.
*Directivity is the ratio, in each one-third octave band, of the average response in the nominal 120º x 70º polar window, to the average response
over the entire solid angle about the source.
system is a
*Beamwidth is the -6dB point, in each one-third octave band, on a polar plot representing the
average within ten degrees of the horizontal and vertical planes about the array.
It can be used with either the 502 B
Acoustimass enclosure for full-
frequency sound reinforcement, or
separately for voice-only reinforce-
ment systems.
The 502 A controlled array is de-
signed for installation in a variety of
configurations, using its integral 10x
safety-rated attachment points, and
Bose suspension and mounting
accessories. The baffle and rear panel
are constructed of high-strength
structural foam, and the speaker grille
is constructed of a durable perforated
steel. It is available in both Profes-
sional Gray and Arctic White, and
both the enclosure and grille are fully
paintable to match interior décor.
The 502 B Acoustimass enclosure
uses a single high-power-handling,
high-reliability 12" (30 cm) woofer.
This new Bose-designed low-
frequency transducer features a high-
temperature, 4" (10.2 cm) voice coil,
cast aluminum basket, and a high-
durability rubber surround. The 502 B
speaker provides clear, deep bass
reinforcement from a small enclosure,
using patented Bose Acoustimass
speaker technology. Its low cross
over frequency results in a non-
localizable sound source, which
allows it to be unobtrusively in-
stalled apart from the 502 A arrays.
The enclosure is fitted with 10x
safety-rated attachment points (top
and bottom) for mounting in a
variety of orientations.
Two-point suspension is easy to
accomplish using the Bose CSB-5B
suspension bracket. The 502 B is
available in both Professional Gray
and Arctic White, and is covered
with a scratch-resistant vinyl, which
can be painted to match any décor.
The Panaray system digital control-
ler is a single rack-space device
which provides crossover functions,
active electronic equalization, and
dual-channel signal processing for
both the 502 A and 502 B.
An optional plug-in card is available
for Bose amplifiers, which allows
502 A controlled arrays to be
combined in a sound-system
design with the Acoustic Wave
Cannon
system.
™
The Panaray 502 system includes a
complete line of accessories for
suspending or mounting both the
502 A and 502 B in a wide variety of
configurations.
®