Atlas Copco PBE 6 S Instructions de réparation - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions de réparation pour {nom_de_la_catégorie} Atlas Copco PBE 6 S. Atlas Copco PBE 6 S 11 pages.
Imprimer la page
Special Tools
Torx screwdriver TX 30
Required
Forcing disks
Pulling-off device
Adjustment tool for carbon brushes
Important!
Before beginning the maintenance work, perform an initial check with a high voltage test according
to VDE (see chapter Electrical and Mechanical Test Instructions).
Before all repair work, pull the power plug from the socket!
Vor der Demontage ist das Gerät an den RTR-READER (Wartungsmeßgerät) anzuschließen, um einen
evtl. Wartungsintervall abzufragen.
Disassembly
1
Removing the
Unscrew the nut (2) and remove the
auxiliary handle
washer (3).
2
Pull out the screw (6).
3
4
Push back the rubber sleeve (A) and lever
off the rubber bushing (5).
5
Remove the rubber sleeve (A).
6
Remove the locking ring (9) with aid of cut
special pliers. If necessary, use a screw-
driver for support.
7
Remove the damping element (8) and the
damper (7).
1
Disassembling
Remove all four balls (1) with aid of a
the ball holding
magnet.
device
2
Loosen the five screws (B) of the adapter
sleeve (2) and remove the adapter
sleeve (2) as well as the O-ring (3). If nec-
essary, hit it lightly with a plastic hammer.
3
Remove the tool acceptance (4) com-
pletely with the snap die (A), the
spacer (5) and the gasket (6).
4
Remove the snap die (A) from the tool ac-
ceptance (4).
5
Remove the O-ring (9), the spacer (8), as
well as the recoil ring (7).
Press the clamping ring (1) and re-
move the auxiliary handle (4). Release
the tension and remove the clamping
ring (1).
Repair Instructions No.182.03/98
4932 319 998
4931 599 018
9170 314 440
9170 302 270
3
2
1
1
2
PBE 6 S
4
5
6
A 9
8 7
3
6
5
4
3
PAGE
1
1
2