Bose Panaray MA12 Manuel d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Bose Panaray MA12. Bose Panaray MA12 7 pages. Modular line array loudspeaker
Également pour Bose Panaray MA12 : Base technique et discussion (36 pages), Manuel de l'utilisateur (2 pages), Manuel d'installation (16 pages), Manuel d'installation (8 pages), Manuel d'entretien (11 pages)

Imprimer la page

For Permanent Installation

.&.

WARNING:

Permanent

installations involve the attachment of the

loudspeakers to brackets or other mounting surfaces for long-term or

seasonal use. Such mountings, frequently in overhead

locations,

involve

risk of personal injury if either the mounting system or the loudspeaker

attachment fails.

Bose" offers permanent mounting brackets for the safe use of these

loudspeakers in such installations. However, we realize some installa

tions may call for use of other, custom-designed mounting solutions or

non-Bose mounting products. While Bose Corporation cannot be held

responsible for the proper design and use of non-Bose mounting sys

tems, we offer the following guidelines for the permanent installation of

any Bose' PANARAY'

MA12/

MA12EX Modular Line Array Loudspeaker:

Choose a position and mounting method consistent with local building

codes and regulations. Ensure the mounting surface and the method

of attaching the loudspeaker to the surface is structurally capable of

supporting the weight of the

loudspeaker.

10:

safety weight ratio is

recommended.

•

Obtain

your

mounting system from a reputable manufacturer, and make

sure the system is specifically designed for the loudspeaker of choice

and

your

intended use.

•

Before using a custom-designed and fabricated mounting

system,

have a licensed professional engineer review the design and fabrication

for structural integrity and safety in the intended application.

• Notice

that all threaded attachment pOints on

the

rear of each loud

speaker cabinet have a metric M6 x 1 x 15 mm thread with 10 usable

threads.

•

Use a

safety cable, separately

attached to the cabinet at a point not

in common with the load bearing attachment points of the bracket to the

loudspeaker.

• If

you

are unfamiliar with the proper

design,

use, and purpose of a

safety cable, consult a licensed professional

engineer,

a rigging profes

sional, or a theatrical lighting trades professional.

CAUTION:

Use only graded hardware. Fasteners should be metric

Grade 8.8 minimum and should be tightened

using

torque

not to

exceed 50 inch-pounds

(5.6

Newton-meters).

Overtightening the

fastener could

result

in irreparable damage to the cabinet and an unsafe

assembly.

Lockwashers or a thread locking compound intended for hand disas

sembly (such as Loctite' 242) should be used for a vibration resistant

assembly.

.'1

CAUTION:

The fastener should be long enough to engage no fewer

than 8 and no more than 10 threads of the attachment point. A fastener

should protrude by 8 to 10 mm, with 10 mm preferred

II"

'I,

inch,

with

'I,

inch preferred) beyond the assembled mounting parts to provide

sufficient threaded attachment to the loudspeaker. Using a fastener that

is too long may result in irreparable damage to the cabinet and, when

overtightened, can create a potentially unsafe

assembly.

Using a fastener

that is too short provides inadequate holding power and may strip

the

mounting

threads

resulting in an unsafe assembly. Confirm that at least

8 full threads are engaged in

your

assembly.

CAUTION:

Do not attempt to alter the threaded attachment points.

While SAE

20 UNC

fasteners

are very similar in appearance to the

metric M6, they are not interchangeable. Do not attempt to re-thread the

attachment points to accommodate any other thread size or type, DOing

this will render the installation unsafe and will permanently damage the

loudspeaker. You may substitute

'I,

-inch washers and lockwashers for

the 6 mm ones.

Permanent installation

ADVARSEL:

Ved permanent installation fastg0res h0jttalerne

beslag eller andre ophreng tillangtids- eller periodisk brug. Denne type

montering, der ofte er placeret over hovedhojde, indebrerer en risiko for

personskade, hvis monteringssystemet eller metod en til fastg0relse af

hojttalerne svigter.

Bose tilbyder beslag til permanent og sikker montering af h0jttalere i

denne type installationer. Visse installationer krrever dog specialudfor

mede monteringsl0sninger eller monteringslosninger, som Bose ikke

kan levere. Bose Corporation kan ikke holdes ansvarlig for den korrek1e

udformning af og brugen af monteringssystemer, der ikke er produceret

af Bose, men angiver folgende retningslinjer for permanent installation af

PBose" PANARAY'

MA12!MA12EX Modular Line Array Loudspeaker:

Vrelg monteringsted, -metode der er i overensstemmelse med lokale

byggevedtregter. Kontroller, at monteringsoverfladen og

m~den

af fast

g0re h0jttaleren til overfladen underst0tter hOjttalerens

vregt.

Et sikkert

10:1 vregtforhold anbefales.

•

Kob monteringssystemet hos en anerkendt forhandler, og s0rg for,

at systemet er specielt udformet til den

p~greldende

h0jttaler og den

p~trenk1e

anvendelse.

•

Fli en autoriseret professionel montor til at kontrollere udformningen og

udforelsen af et specialtilpasset monteringssystem, for det tages i brug.

•

Bemrerk, at aile fastgorelsespunk1er

bagsiden af hver

h0jttalerkabi

net har et metrisk

x 1 x 15 mm-gevind og 10 brugbare gevindskrer.

• Brug et sikkerhedskabel, der er separat fastgjort

til kabinettet

et andet sted end der, hvor h0jttalerens brerende fastgmelsespunk1er

placeret.

•

Hvis

ikke

er bekendt med den rette

udformning,

brugen af og

formalet med et sikkerhedskabel

skal du kontak1e en autoriseret profes

slonel montor, en forhandler af udstyr til teaterbelysning eller lignende.

FORSIGTlG:

Brug kun kvalitetsvrerk1oj. Der skal som minimum

anvendes metriske 8.8-skruer, som skal sprendes

med et moment, der

ikke overstiger 5.6 Newton-meter. Hvis

skruerne sprendes for meget,

kan det resultere i permanent beskadigelse af kabinettet og en ustabil

montering.

Sprendeskiver eller en llisering beregnet til manuel adskillelse (f.eks. Loc

tite''-

242)

skal bruges til en montering, der skal kunne

t~le

vibrationer.

FORSIGTIG:

Skruen skal vrere lang nok til, at kunne

fat i mindst

8 og h0jst 10 af fastgmelsespunk1ets

gevindskrer.

En skrue skal stikke

8 til 10 mm

(10

mm er at foretrrekke) ud over den samlede montering

for at sikre tilstrrekkelig

fastgorelse

til h0jttaleren. Hvis der anvendes en

skrue,

der er

for

lang, kan det resultere i permanent skade pli kabinettet

og - ved oversprending - en potentielt ustabil montering.

Hvis

der

anvendes en skrue, der er for kort, bliver fastholdelsen

utilstrrekkelig,

gevindskrerene kan

0delregges,

hvilket resulterer i en ustabil montering.

Kontroller, at skruen har fat i mindst 8 hele gevindskrer.

. . .

FORSIGTIG:

Forseg ikke at rendre

fastgerelsespunk1erne.

SAE '1,-20 UNC-skruer ligner de metriske M6-skruer meget, men de kan

ikke erstatte hinanden. Forseg ikke at genopskrere

fastgorelsespunk

terne for at tilpasse dem til andre gevindstmrelser elier-typer.Dette vii

gere installationen usikker og resultere i permanent beskadigelse af

h0jttaleren, Du kan erstatte 'I,-tommer laseringe og sprendeskiver med 6

rnm-sprendeskiver.

WARNUN(

Hal\erungen odt

saisonal verwen

oft an Decken

zungsgefahr,

tigung nicht Ore

Bose bietet Mor

terungen gewah

Installationen

slosungen oder

Die Bose Corpo

Verwendung VOl

haftbar, empfieh

Fest-Installation

ray

LoudspeakE

Wahlen Sie hier.

mende Befestig

die Montageflae

an der Flache sl

zu tragen. Es wi

•

Beziehen Sie I

Hersteller

und v

Lautsprecher Ih

• Lassen

Sie da

tigungsmaterial

Sicherheit ubeq

•

Bitte beachter

Ruckseite jedes

Gewinde mit mi

• Verwenden S

Punk1 als den d

Lautsprecher

•

Wenn Sie nict

SicherheitskabE

Installationsfact

ACHTUNG

tigungsteile

mu:

und durfen

nict

Befestigungstei

Beschadigunge

kann beeintracr

Wenn eine vibr<

erungsscheiber

B. Loctite' 2·

11\

ACHTUNG

estens 8 und hi

verwendet

were

(vor.zugsweise

vorstehen, dam

wird. Wenn ein

irreparablen Sc,

intrachtigung dl

Befestigungstei

konnen ausreifl

intrachtigt

wird.

ganzen Windun

!\ACHTUNG

zu and ern. Ob ...

M6-Teilen stark

Sie nicht, die G

GewindegroBel

Installationssict

beschadigt.

Sie

anstelle der

'1.-: