Atlas Copco 8426111070 Instructions relatives au produit - Page 7

Parcourez en ligne ou téléchargez le pdf Instructions relatives au produit pour {nom_de_la_catégorie} Atlas Copco 8426111070. Atlas Copco 8426111070 12 pages. Riveting hammer

Imprimer la page

RRH 10P-TS

Service

Maintenance instructions

Service recommendations

Preventive maintenance is recommended at regular intervals. See the detailed information on preventive

maintenance. If the product is not working properly, take it out of service and inspect it.

If no detailed information about preventive maintenance is included, follow these general guidelines:

■

Clean appropriate parts accurately

■

Replace any defective or worn parts

Preventive maintenance

Overhaul

If the riveting hammer is used every day, it should be overhauled and cleaned once every six months.

The filter behind the adapter should be cleaned frequently to prevent choking with resultant decrease in

capacity.

Lubrication instructions

Lubrication guide

Brand

Castrol

Esso

Mobil

Klüber Lub.

Texaco

Molykote

* Not for angle gears.

Brand

Molykote

Lubrication

When the riveting hammer is in use, it should be oiled once per shift. The oil (fluid type), which should be

applied in an amount of 1 cm³, can be dropped into the air hose. When the machine is in continuous ser-

vice, installation of an Atlas Copco oil-fog lubricator is recommended.

An excessive amount of oil will prevent the main valve from functioning. It is therefore vitally important

to lubricate in strict accordance with the recommendations.

Use lubricants of good quality. The oils and grease delivered by the oil companies mentioned in the table

are examples of lubricants which are recommended.

General purpose, Bearings and Gears*

Energrease LS-EP2

OBEEn UF 1

Beacon EP2

Rembrandt EP2

Mobilegrease XHP 222 NLG 2

Klübersynth UH 1 14-151

Multifak EP2

BR2 Plus

Angle gears

Longterm 2 Plus

Service