Bose SoundTouch 30 Manuel du propriétaire - Page 29

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Bose SoundTouch 30. Bose SoundTouch 30 30 pages. Enabling standby low power mode
Également pour Bose SoundTouch 30 : Manuel du propriétaire (26 pages), Manuel de démarrage rapide (2 pages), Manuel du propriétaire (40 pages), Manuel du propriétaire (32 pages), Manuel (9 pages), Manuel de démarrage rapide (2 pages)

Bose SoundTouch 30 Manuel du propriétaire

Set up your speaker using a computer

You can set up your speaker using a computer rather than a smartphone or tablet.

Before you begin

• Position your speaker next to your computer.
• Make sure your computer is on your Wi-Fi network.
• Obtain a USB A to USB Micro B cable (not provided).
Notes:
• A USB A to USB Micro B cable is commonly used for charging mobile devices. You
can also purchase this at your local electronics store. If you don't have this cable,
contact Bose customer service.
• The USB connector on the back of your speaker is for computer setup only. The
USB connector is not designed to charge smartphones, tablets, similar devices or
the speaker itself.

Computer setup

During setup, the app prompts you to temporarily connect the USB cable from the
computer to your speaker. Do not connect the USB cable until the app instructs you to
do so.
1. Plug the power cord into an AC (mains) power outlet.
2. On your computer, open a browser and go to:
global.Bose.com/Support/ST30III
Tip: Use the computer where your music library is stored.
3. Download and run the SoundTouch® app.
The app guides you through setup.
4. After setup is complete, disconnect the USB cable from your computer and from
your speaker. Move your speaker to its permanent location.
A P P E N D I X : C O M P U T E R S E T U P
E N G L I S H - 2 9