Bose 301 Series V Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Bose 301 Series V. Bose 301 Series V 10 pages. Direct/reflecting speakers
Également pour Bose 301 Series V : Manuel du propriétaire (13 pages), Manuel du propriétaire (12 pages), Manuel du propriétaire (12 pages), Manuel du propriétaire (21 pages), Manuel du propriétaire (13 pages), Manuel du propriétaire (16 pages)

DISASSEMBLY/ASSEMBLY PROCEDURES

8. Rear Tweeter Replacement

8.1 Strip the wires and connect the red wire

to the positive (+) terminal and the black

wire to the negative (-) terminal. Dress or

twist the wires to prevent buzzes.

8.2 Place the tweeter (3) into the cabinet

and secure it using the tweeter bracket (2)

and screw (1).

8.3 Perform procedures 4.2 and 2.

9. Terminal Block Connector Removal

9.1 Perform procedures 1, 3.2 and lift the

woofer out of the cabinet, but do not cut the

wires.

Audio Signal

Generator

Power Amplifier

Input

Figure 2. Test Equipment Set Up

9.2 Unclip the terminal block connector

(4) from the inside of the cabinet and push

it out through the rear panel. Cut the wires

as close to the terminals as possible.

10.1 Terminal Block Connector

Replacement

10.1 Strip the wires and connect the red

wire to the positive (+) terminal and the

black wire to the negative (-) terminal.

Dress or twist the wires to prevent buzzes.

10.2 Secure the terminal block connector

(4) to the cabinet.

10.3 Perform procedure 4.2 and 2.

Output

Speaker