Bose Freestyle Speaker System Manuel du propriétaire - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Bose Freestyle Speaker System. Bose Freestyle Speaker System 20 pages. Earbuds
Également pour Bose Freestyle Speaker System : Manuel du propriétaire (6 pages), Manuel d'installation rapide (1 pages), Manuel du propriétaire (31 pages), Manuel d'instruction (18 pages)

System Setup

Making system connections

Figure 9

Speaker cable connection

to the Acoustimass module

Figure 10

LEFT and RIGHT markings

on the speaker connectors

Figure 11

Interface cable connector

Labeled jacks on the rear of the Acoustimass

the system ensure a fast and easy hookup.

CAUTION: Do not plug the Acoustimass module into an AC power (mains) outlet until all the

source components are connected to the Interface module.

1. On the rear panel of the Acoustimass module, insert the single-plug end of the speaker

cable into the SPEAKERS connector (Figure 9). Firmly tighten the two screws on the

connector.

2. At the other end of the speaker cable, grasp the two connectors and pull the cable apart

as much as necessary to reach each speaker.

3. Plug the LEFT connector of the separated cable into the rear jack on the left speaker (to

the left of the TV as you face it) and the RIGHT connector into the rear jack on the right

speaker (to the right of the TV). LEFT or RIGHT is printed on the appropriate connector

(Figure 10).

4. On the Acoustimass module, insert the Interface module connector into the jack labeled

with an input

symbol (Figure 11). Firmly tighten the two screws on the connector.

Note: Longer speaker cable is available from Bose, if you need it. To contact Bose to order it,

refer to the address sheet included in the carton.

AM267190_00_V_pdf • July 24, 2002

module and the custom cables supplied with

Screws