Bose Lifestyle 35 Series II Manuel d'installation - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Bose Lifestyle 35 Series II. Bose Lifestyle 35 Series II 42 pages. Noise cancelling
Également pour Bose Lifestyle 35 Series II : Manuel d'installation (36 pages), Manuel du propriétaire (25 pages), Manuel du propriétaire (24 pages), Manuel du propriétaire (13 pages), Manuel d'installation rapide (3 pages), Manuel d'utilisation (46 pages), Manuel du propriétaire (36 pages), Manuel du propriétaire (32 pages), Manuel de démarrage rapide (2 pages), Réinitialisation d'usine (2 pages), Manuel de démarrage rapide (2 pages), Manuel du propriétaire (38 pages)

Imprimer la page

Bose Lifestyle 35 Series II Manuel d'installation

ASIC

YSTEM

ONNECTIONS

Your system is now ready for power

Figure 17

Power connection for

the Acoustimass module

If your TV does not have a menu setting, follow the instruction (below) to use the on/off

switch.

If your TV has neither a switch nor a menu option for turning off the internal speakers, reduce

the TV volume to its lowest setting.

Using your TV speaker on/off switch:

If the rear panel of your TV has a SPEAKER ON/OFF switch, set it to the OFF position and

adjust the TV volume to about 80% of the maximum.

Selecting the FIXED audio output option on your TV

If you connected the media center to audio output jacks labeled FIX/VAR (or with no

indication if they are fixed or variable) follow these instructions.

1. Using your TV remote, display the audio menu on your TV screen.

In most cases this can be done by pressing the Menu button and selecting Audio.

2. Turn off the TV speakers (if you have not already done so) as described above.

3. Locate the Audio Output item and select Fixed.

4. Exit the audio menu on your TV screen.

If your TV does not provide Fixed audio as an option, but you were able to turn off the internal

speakers, set your TV volume to about 80% of the maximum.

Note: Bose recommends using a high-quality surge suppressor on all electronics equipment.

Voltage variations and spikes can damage electronic components in any system. A quality

suppressor can eliminate the vast majority of failures attributed to surges and may be purchased

at electronics stores.

Connect the two AC power (mains) cords in the following order:

1. On the connector panel of the Acoustimass

Acoustimass module power cord into the AC power jack (Figure 17).

2. Insert the other end of the power cord into the AC (mains) outlet.

3. Turn the Acoustimass module POWER switch to on.

Acoustimass module

connector panel

AUDIO

OUTPUTS T O

INPUT

CUBE SPEAKERS

FRONT

SURROUND

POWE R

100-120/200-240V AC

I=on

0=off

4. If you have not yet plugged the small round connector of the media center power supply

cord into the DC POWER jack on the media center connection panel, do so now

(Figure 18).

Français

module, plug the appropriate end of the

POWER switch

AC power jack

50/60 Hz

350W MAX.

Español

English

AC (mains)

outlet