Bose CINEMATE 1 SR Manuel de configuration - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Bose CINEMATE 1 SR. Bose CINEMATE 1 SR 40 pages. Home theater speaker system
Également pour Bose CINEMATE 1 SR : Manuel d'utilisation (16 pages), Manuel de configuration (20 pages), Manuel d'utilisation (44 pages)
Imprimer la page
SYSTEM SETUP
B. Plug one end of the selected audio cable into the corresponding
audio output
connector
on your TV.
Note: If you are using an optical cab/e, be sure to remove the protective cover from the
plug. When inserting the plug into the connector, make sure it is pushed in a// the way.
You may sense a slight resistance before you fee/it crick into p/ace.
C. Lay the speaker array grille-side down on the table in front of your TV and locate the
TV input connections.
Note: To protect the surface of your table you may want to temporarily put a protective
cloth under the speaker array, The foam bag removed from the speaker array could be
used for this purpose.
Note: Be sure to remove a// protective films from the speaker array before operating the
system. These may affect acoustic performance if/eft in p/ace.
TV Input
D=
Optical
Digital
audio
Coaxial
R -- L
Digital
Analog
audio
audio
Plug the other end of the selected audio cable coming from the TV into the
corresponding
connector on the speaker array.
10 - English