Bose CineMate 130 Manuel du propriétaire - Page 31
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Bose CineMate 130. Bose CineMate 130 34 pages. Soundtouch series ii wireless adapter
Également pour Bose CineMate 130 : Manuel du propriétaire (50 pages), Manuel de l'utilisateur (6 pages), Manuel du propriétaire (22 pages), Manuel de démarrage rapide (2 pages)
Imprimer la page
Problem
What to do
Poor or
• Remove all protective films from the system.
distorted
• Secure all cable connections on the soundbar, TV, and connected sources.
sound
• If you see the error message Cannot find Acoustimass:
- Plug in the Acoustimass
- Pair the Acoustimass module with the console (see "If your console
• If using the analog or
• Factory reset the system (see page 32) and run the ADAPTiQ
calibration (see page 20).
Intermittent
• Secure all cable connections on the soundbar, TV, and connected sources.
sound
• Move system away from potential interference, such as a wireless router,
cordless phone, television, microwave, etc.
If your console cannot find the Acoustimass
The Acoustimass module and console are paired at the factory. However, if you
see the error message Cannot find Acoustimass on the display, perform this
pairing procedure:
1.
Unplug the Acoustimass module.
2.
Press
3.
until 15 PAIR ACOUSTIMASS appears on the display.
Press
4.
Press
.
Plug in Acoustimass appears on the display.
5.
Plug the AC power cord into an AC (mains) outlet.
After the Acoustimass module connects to the console, Pairing complete
appears on the display.
cannot find the Acoustimass
on the remote control.
Care and Maintenace
module.
®
module").
®
connector, decrease the volume on your source.
audio
®
module
®
English - 31