Bose CD-20 Fiche d'instruction

Parcourez en ligne ou téléchargez le pdf Fiche d'instruction pour {nom_de_la_catégorie} Bose CD-20. Bose CD-20 1 pages. Cd changer adaptor and face plate disassembly/assembly procedure

Imprimer la page

CD Changer Adaptor and Face Plate Disassembly/Assembly

Procedure

1. Face Plate Removal

1.1 With the CD changer

upside down,

press down on the two lower tabs that

secure the face plate (1) to the chassis.

1.2 Pull the face plate away from the

chassis.

2. Face Plate Replacement

2.1 With the CD changer

upside down,

angle the face plate (1) into the chassis so

that the two upper tabs enter the chassis

first. While pressing down on the two lower

tabs, press the face plate into the chassis.

3. Adaptor

Removal

3.1 Loosen the two allen screws that are

used to secure the two clips (7) to the

chassis.

3.2 Remove the two clips (7) that secure

the adaptor (2) (5) to the chassis and slide

the adaptor off.

4. Adaptor

Replacement

4.1 Place the adaptor (2) (5) onto the

chassis in the position shown in Figure 1.

4.2 Place the two clips (7) onto the posts

located on the chassis.

4.3 Slide the clips so that the posts are

positioned

in the smaller opening of the

clip. Tighten the allen screw on each clip.

Importanth

Remove the two brass shipping screws located on the bottom of the CD

changer mechanism before installation. The elevator will not operate with these screws in

place. See Figure 2 below.

Item

Number

Description

BEZEL,

CHANGER,

CD-20

ADAPTER,

MOUNTING,

LEFT

MECHANISM,

CD, WITH

DRIVE

GROMMET,

MOUNTING

ADAPTER,

MOUNTING,

RIGHT

BUTTON,

EJECT

PLATE,

CLIP,

CD MOUNTING

Part

Number

178210

187577

178359

178919

187576

180031

181900

Remove these two shipping screws

before installing the CD assembly

Jpper Tab

Post

Figure 2. Shipping Screw Location

Figure

1. Exploded

View

Instruction Sheet 183884-I1

Rev. 01/16/01