Bose S1 Pro Manuel du propriétaire - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Bose S1 Pro. Bose S1 Pro 19 pages. Multi-position pa system
Également pour Bose S1 Pro : Instructions d'installation (2 pages), Manuel du propriétaire (15 pages)

Imprimer la page
Bose S1 Pro Manuel du propriétaire

System Setup

Connections and Controls

The S1 Pro control panel provides the necessary connectors, controls and indicators for operation.
q
w
e
r
t
y
u
Use Channel 1 and 2 inputs for microphones and musical instruments. Integrated ToneMatch® signal
processing allows microphones and instruments to sound their best. Use Channel 3 for Bluetooth®
connectivity and line-level inputs.
Signal/Clip indicator: Displays the input signal status in color.
q
Green: Signal present
Red: Signal clipping
Note: Reduce the corresponding volume control to prevent signal clipping.
Volume control: Adjust the volume of your microphone, instrument or audio source.
w
Treble control: Adjust the high-frequency balance of your microphone or instrument.
e
Bass control: Adjust the low-frequency balance of your microphone or instrument.
r
Reverb control: Adjust the amount of reverb applied to your microphone or instrument.
t
ToneMatch switch: Move the switch to the
y
Channel input: Analog input for connecting microphone (XLR) and instrument (TS unbalanced) cables.
u
Aux input: Use a 3.5 mm TRS cable to connect a line-level audio source.
i
Line Output: Use a ¼" TRS cable to connect the line-level output to the Channel 1 or 2 input of a second
o
S1 Pro to create a mono, two-loudspeaker setup.
Note: Line Out is post mix.
Service port: Micro-USB connector for Bose service use only.
a
Bluetooth Pair button: Used to set up pairing with Bluetooth-capable devices, such as mobile phones,
s
tablets and laptops.
Owner's Guide • S1 Pro System
1
2
SIGNAL
SIGNAL
or
position to enable the ToneMatch preset.
3
SIGNAL
i
System Setup
s
a
o
English • 7