Bose Wave Radio Manuel du propriétaire - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Bose Wave Radio. Bose Wave Radio 16 pages. Owner's guide
Également pour Bose Wave Radio : Manuel du propriétaire (20 pages), Manuel du propriétaire (12 pages), Manuel d'installation rapide (1 pages), Manuel du propriétaire (27 pages), Manuel du propriétaire (26 pages)

Setting Up

Connect the power cord and antennas

Find the jacks on the back of your radio (see Figure 3). Unwind all cords.

Connect the power cord

1. Plug the small end of the power cord into the power jack.

2. Plug the other end of the power cord into an electric outlet.

The display panel should light up.

Connect the antennas

1. Plug the FM antenna into the "FM 75 External" connector.

2. Plug the AM antenna into the "AM LOOP" jack.

3. Straighten both antennas. Move the AM loop and ends of the FM antenna as far as

possible away from the radio.

4. Use the clip and peel-and-stick tape to attach the AM loop antenna to a smooth, clean

surface, if you wish.

AUX IN

VARIABLE OUT

120V~AC

50-60HZ 50W

LOOP

172087

January 7, 2002

Note:

The time display will begin to flash

after power is connected. Press the

CLOCK SET key once to stop the

flashing.

Note:

A second FM antenna is built into the

power cord. For best reception,

adjust the antenna by moving the

power cord.

Figure 3

Plug the antennas and power cord

into their jacks.

Peel-and-

stick tape

clip

AM149204_02_V.pdf