Bose FreeSpace 3 Note d'application

Parcourez en ligne ou téléchargez le pdf Note d'application pour {nom_de_la_catégorie} Bose FreeSpace 3. Bose FreeSpace 3 2 pages. Ceiling install kit
Également pour Bose FreeSpace 3 : Manuel de l'installateur (15 pages), Manuel d'installation (12 pages), Manuel d'installation (13 pages), Manuel de conception (4 pages), Manuel de conception (4 pages), Manuel de démarrage rapide (2 pages), Manuel d'entretien (15 pages)

Imprimer la page
Bose FreeSpace 3 Note d'application
How to Modify FreeSpace 3 Wiring
This application note illustrates how to connect an Acoustimass
installations.
I. Use of Transformer
Connecting an amplifier output to a single
module in a 70V configuration:
PA
The transformer tap setting from the factory is for 200W use. To set it for lower wattage, remove the end of
the '+' jumper wire connected to 200W and reattach it to the appropriate tap (100W, 50W or 25W).
II. Use of Direct Mode (Transformer Bypass)
Connecting a mono source with the
transformer bypassed:
Note: Jumpers required
TRANSFORMER SETTINGS
for 70V/100V operation.
For transformer bypass,
remove jumpers from
transformer settings and
+
use 4-8Ω input.
SAT 2
SATELLITE
CONNECTIONS
MONO
70V/100V
INPUT
SAT 1
STEREO
CH 2
MONO
STEREO
USE JUMPERS
CH 1
FreeSpace 3
®
Acoustimass Module
P R O F E S S I O N A L S Y S T E M S
FreeSpace
Business Music System
Jumpers in
the factory-
installed
configuration
___
for 200W use.
Connecting a stereo source with the
transformer bypassed:
SAT 4
SAT 3
SAT 2
SAT 1
4-8Ω
INPUT
®
3
®
bass module in three common
Note: Jumpers required
TRANSFORMER SETTINGS
for 70V/100V operation.
For transformer bypass,
remove jumpers from
transformer settings and
+
use 4-8Ω input.
SAT 2
SATELLITE
CONNECTIONS
MONO
70V/100V
INPUT
SAT 1
STEREO
CH 2
MONO
STEREO
USE JUMPERS
CH 1
FreeSpace 3
®
Acoustimass Module
SAT 4
SAT 3
SAT 2
SAT 1
4-8Ω
INPUT
1
2
OF
p r o . b o s e . c o m