Bose PM8500 Manuel de l'utilisateur - Page 28
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Bose PM8500. Bose PM8500 44 pages. Configurable professional power amplifier
Également pour Bose PM8500 : Fiche technique (6 pages), Manuels d'installation et de sécurité (21 pages)
Imprimer la page
User guide
DSP
Speaker Presets
Array EQ
Delay
➞
Limiting
Description
Available Controls
Options
Notes
➞
CONFIG
Output Config
Input Routing
Description
Available Controls
Options
Page 28 User Guide
This display allows you to adjust limiting parameters that allow for loudspeaker driver protection for each output channel.
To access Limiting, use the rotary encoder dial from the DSP menu to highlight, then press to select.
Navigation Soft Key: Back to DSP menu.
Menu Soft Key #5: Enables the selection of the output channel (or output groupings) using the rotary encoder dial.
Menu Soft Key #1: Enables the selection of a peak voltage value, which corresponds to the maximum voltage that may be applied to the driver
without causing over-excursion. Use the rotary encoder to adjust the selected parameter.
Menu Soft Key #2: Enables the selection of an RMS voltage threshold value, which works in conjunction with the subsequent attack and release
values. The RMS voltage setting corresponds to the long-term power handling capability of the loudspeaker. Use the rotary encoder to adjust the
selected parameter.
Menu Soft Key #3: Enables the selection of attack time, in milliseconds, related to the RMS limiter. Use the rotary encoder to adjust the selected
parameter.
Menu Soft Key #4: Enables the selection of release time, in milliseconds, related to the RMS limiter. Use the rotary encoder to adjust the selected
parameter.
PEAK: 0.5 to 200 Volts (dependant on output mode), 0.5 V increments
RMS: 0.5 to 100 Volts (dependant on output mode), 0.5 V increments
ATTACK: From 500 to 10,000 milliseconds
RELEASE: From 500 to 10,000 milliseconds
Values are automatically applied for Bose
For non-Bose loudspeakers, refer to manufacturer technical specifications for information to properly configure the limiter.
See "Setting the Limiting Function for use with 3rd Party Loudspeakers" on page 33 for further details.
The CONFIGURE menu allows you to access the configuration of input and output signals for a particular system design.
Navigation Soft Key: Return back to MAIN MENU.
Menu Soft Key #1-5: Changes menu to respective category.
Output Config
Input Routing
MAIN MENU < DSP < LIMITING
loudspeakers set in MAIN MENU < DSP < SPEAKER PRESETS.
®
MAIN MENU < CONFIGURE
pro.bose.com
English