Bose SoundTouch SA-4 Manuel du propriétaire - Page 32
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Bose SoundTouch SA-4. Bose SoundTouch SA-4 42 pages. Amplifier
Également pour Bose SoundTouch SA-4 : Manuel (34 pages), Manuel du propriétaire (36 pages)
Imprimer la page
Appendices
Appendix C: Wall mounting the
SoundTouch™ wireless adapter
Follow these instructions to wall mount your SoundTouch
either vertically with the connector panel facing left, or horizontally with the con-
nector panel facing up.
Note: Mounting hardware must be purchased separately. If the mounting
hardware instructions differ from these instructions, follow the mounting
hardware instructions.
Wood Mounting: Mount to 1 in. (25.4 mm) or thicker wood. Drill hole with
a
in. (3.17 mm) drill. Use (2) #8x1¼ in. (32 mm) pan-head wood screws.
Wallboard Mounting: Mount to
pilot hole with a ³/
wall anchors, and (2) #8x1¼ in. (32 mm) pan-head wood screws.
Wood
above surface
1.
Mark holes on the wall 6¼ in. (158.7 mm) center-to-center.
2.
Drill holes. Insert anchors (if used).
3.
Install screws. Leave the screw heads ¼ in. (6.35 mm) above wall surface.
4.
Position SoundTouch
32 - English
Vertical
orientation
Connector
panel is
facing left.
in. (9.5 mm) or thicker wallboard. Drill
in. (4.76 mm) drill. Use (2) #6-8x1 in. (25.4 mm) plastic
16
above surface
™
wireless adapter onto screws. Press firmly into place.
Horizontal
orientation
Connector panel
is facing up.
wireless adapter. Install
™
Wallboard