Drolet 5135 ML Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Drolet 5135 ML. Drolet 5135 ML 16 pages.

Installation Of Your Drolet Woodstove

It is very important to position the woodstove as close as possible to the chimney, and in

an area that will favor the most efficient heat distribution possible throughout the house.

The stove must therefore be installed in the room where the most time is spent, and in the

most spacious room possible. Remember: woodstoves produce radiating heat, the heat

we feel when we are close to a woodstove. A woodstove also functions by convection,

that is through the displacement of hot air accelerated upwards and its replacement with

cooler air. If necessary, the hot air distribution from the stove may be facilitated by a

blower or the installation of floor or wall grills.

Important: A woodstove must never be installed in a hallway or near a staircase,

since it may block the way in case of fire or fail to respect required

clearance.

The woodstove must not be hooked up to a hot air distribution system

since an excessive accumulation of heat may occur.

Your woodstove should be placed on a non-combustible surface. Having these minimum

specifications.

Thickness

of sheet

1/4" (6 mm)

It is of outmost importance that the clearances to combustible material mentioned on your

woodstove certification plate be scrupulously respected upon installation.

Back wall

16" (406 mm)

* Height, from bottom of the stove to the ceiling.

Front

Protrusion

18" (457 mm)

Side wall

16" (406 mm)

Side

Protrusions

6" (150 mm)

Corners

16" (406 mm)

Rear

Protrusion

6" (150 mm)

*Height

7' (2,3 m)