Bose A20 Aviation Manuel du propriétaire - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Bose A20 Aviation. Bose A20 Aviation 40 pages. Aviation headset
Également pour Bose A20 Aviation : Manuel de référence rapide (2 pages), Manuel du propriétaire (44 pages), Manuel du propriétaire (43 pages), Manuel du propriétaire (44 pages), Manuel du propriétaire (44 pages), Manuel de référence rapide (2 pages)

Preparing the Headset for Use

Your headset may be shipped with the microphone assembly (boom microphone

and cable) attached to the left earcup. If your headset is shipped with the micro-

phone assembly packed separately, you can attach it to either earcup.

Choose the earcup (L or R) to receive the microphone assembly. Also, make sure

that the earcup connector pins are clean and free of debris.

Use a Phillips screwdriver to loosen the two screws on the terminator cover

near the bottom of the earcup where you want to attach the microphone as-

sembly.

Remove the terminator cover to reveal the connector pins on the earcup.

Carefully line up the microphone assembly to the small connector socket on

the earcup.

Slide the connector into the socket until it reaches the stop.

Terminator

cover

Connector

pins

CAUTION: Do not force the connector into the socket, or earcup damage may occur.

Tighten the screws to secure the assembly.

Attach the terminator cover to the earcup that does not have the microphone

assembly attached. Insert the screws, then align and tighten them.

Note: The headset will not work without the terminator cover installed.

CAUTION: Be sure to try the headset and fully test its operation before flight.

10 - English

Microphone assembly

Connector pins

L (left)