Bose Aviation Headset X Manuel du propriétaire - Page 29

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Bose Aviation Headset X. Bose Aviation Headset X 36 pages. Owner's guide
Également pour Bose Aviation Headset X : Manuel d'installation rapide (1 pages), Manuel du propriétaire (36 pages), Manuel du propriétaire (16 pages), Manuel du propriétaire (36 pages)

Figure 23

Removing and attaching the

headband cushion

Headset Care and Maintenance

Battery door replacement

1. Lift up the battery door from the control module, using the ﬁnger

indent.

2. Gently rotate the cover sideways to remove from the control

module.

3. Insert new door tab, being careful to insert between the metal

spring and plastic housing.

The headband cushion is designed to give the maximum level of

comfort to your headset.

Please follow the maintenance instructions below for regular care.

Bose recommends that the cushion be replaced after regular care

and maintenance fails to restore the wool pile to its original size and

shape.

To replace the cushion (Figure 23):

1. On a protected surface, turn the headset upside down. With

another person holding the headset open for you, remove the old

cushion from the magnesium headband.

2. With the headband still held open, align the center of the new

cushion with the center of the headband and press ﬁrmly from

the center toward the outside.

Note: Removing and attaching the headband cushion may be eas-

ier if a second person holds the headset open.

Replace the boom microphone cable or connector access cover as

described in "Removing an attached boom microphone cable" and

"Attaching the boom microphone cable" on page 11.

AM270261_00 V.pdf May 16 2003

Headband cushion