Absen K5D Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Absen K5D. Absen K5D 17 pages.

Product wiring

• Preparation before wiring

Before connecting to power supply and switching on control signal to the entire screen, please carefully

check the power supply and signal cable connections. Please carefully check the "L" line, "N" line and "PE"

of each cabinet's AC inlet, and ensure there is no short circuit between the three lines (Use multimeter to

measure).

• Power supply cabling instructions

Please calculate and select the power distribution box based on

consumption. Please consult your power distribution box manufacturer to specifically match. Cabinet's input

voltage is 100-240V/AC, and 3X2.5mm

When input voltage is 220V, each power supply can be used to supply power for maximum 12 cabinets.

When the input voltage is 110V, each power supply can be used to supply power for maximum 6 cabinets.

Take K3 8x4 cabinets for example; following are the instructions for power and signal cable connection method:

Total power for 32 cabinets with size 750x750mm is: 32x0.75x0.75x570W=10.2kw,

8 cabinets for each line connected to power supply in series. In this case

use a 3X2.5mm

power cable to connect from the distribution box to the left or right of each line cabinet.

- 09 -

maximum power

power cable is used to connect from distribution box to cabinet.

Leading

LED

220V

K series

Applications

User Manual