DROMEAS Alma HC Manuel d'utilisation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} DROMEAS Alma HC. DROMEAS Alma HC 17 pages. Working desk
Également pour DROMEAS Alma HC : Manuel d'utilisation (12 pages)
Imprimer la pageIt is suggested that you keep children at a safe distance when unpacking. As described in
section 2.2.1, the packaging of the product consists of light, reusable materials. The user
is required to perform a separation of the packaging materials. It should be noted that the
company works with certified recyclers.
3.3 Assembly and installation
Dromeas recommends that the installation be made by a specialist representative or an
assembly company. For correct assembly, please refer to the assembly drawing (see
attachment). It is necessary to check the electrical equipment of the working desk. The
installation should be carried out by 2 technicians in an area of at least 3 m x 3 m. To
avoid damage to the office or floor, place a suitable soft surface (eg blankets) in the
working area.
Only disconnect or install the electrical connections when there is no electrical voltage.
DANGER: Contact with electrical voltage can cause serious injury and death!
The supply connections can only be made by qualified and authorized personnel
3.4 Height adjustment / Compensation of ground anomalies
To compensate for ground anomalies, rotate the regulators up to 2.0 cm respectively.
Note: If the workplace must be moved or changed, at least two people must be occupied.
Dragging is not recommended as this may cause damage to sensitive floors.