Drone Sky Hook DSH-LSL1-P3 Manuel d'installation et d'utilisation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Drone Sky Hook DSH-LSL1-P3. Drone Sky Hook DSH-LSL1-P3 12 pages. Led searchlight with built-in laser pointer for dji phantom 4/3

Imprimer la page

www.droneskyhook.com

Operation

Please click on the following link to watch the use of the drone Remote Controller C1/C2 button to control and set the

Drop Wheel and Searchlight. These videos are applicable for Mavic Pro, Mavic Pro Platinum, Phantom 4 and Phantom 3

together with Drone Sky Hook Release & Drop PLUS models only and a SearchLight.

https://youtu.be/bG4lBDKNdKE

https://youtu.be/l9lDXQcLWKQ

Operation of the LED SearchLight with Built-In Laser Pointer for DJI Phantom 4 and

Phantom 3

Connect the Searchlight to the AUX Channel jack on the Release and Drop PLUS device.

Turn ON the AUX Channel and then select the Searchlight desired light output mode by pressing the Searchlight

pushbutton multiple times.

When the Searchlight is turned ON, the Red light on its batteries box will be illuminated.

See operation video in the product support page.

At the end of the Searchlight operation you must completely turn OFF the Searchlight to prevent continuous battery drain.

Verify that the AUX Channel is ON and then turn OFF the Searchlight by pressing its pushbutton multiple times until the

Red light on its batteries box turns OFF.

NOTE: The Searchlight draws standby current from its batteries even when the AUX Channel is OFF. Follow this

procedure to completely turn OFF the Searchlight and prevent continuous battery drain.

Press the SearchLight

pushbutton to turn it On or

Off and to change the

SearchLight operation

modes.

Press the pushbutton

multiple times to select the

desired operation mode or

function.

Page 9 of 12