Elegoo MARS 3 Manuel - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Elegoo MARS 3. Elegoo MARS 3 18 pages.

3.3 Resin Parameter (See picture 11)

Resin Density:

1.1g/ml

Resin Cost:

You can input the cost of resin and after slicing you will see how much it costs for

your model.

3.4 Parameters (See picture 11)

Layer Height:

The recommended height is 0.05mm but you can set it from 0.01-0.2mm. The

higher you set, the longer time it will take for exposure of each layer.

Layer Count:

Set as 3-6 layers.

Exposure Time:

Can be set as 1.5-3s depending on the height of the layer and the complexity

of the model, the thicker the setting is, the more the bottom will stick to the build platform.

Bottom Exposure Time:

stick to the build platform.

Transition Layer:

Default parameter and does not need to be changed.

Transition Type:

The default parameter is linear and does not need to be changed.

Waiting Mode Of Printing Process:

The quiescent time after retract:

Bottom Lift Distance:

When printing the bottom layers, it is recommended to set the lifting

distance of the build plate to 3-5mm.

Lifting Distance:

When printing the normal layers, it is recommended to set the lifting distance

of the build plate to 3-5mm.

Bottom Lift Speed:

When printing the bottom layers, it is recommended to set the lifting speed

of the build plate to 80mm/min.

Lifting Speed:

When printing the normal layers, it is recommended to set the lifting speed of the

build plate to 110mm/min.

Retract Speed:

When printing the bottom layers, it is recommended to set the retract speed of

the build plate to 280mm/min.

Can be set as 20-40s, the longer the setting is, the more the bottom will

Default parameter is static and does not need to be changed.

Default parameter is 0 and does not need to be changed.

（Picture 11）