Drop NUFORCE MOVE Manuel de dépannage

Parcourez en ligne ou téléchargez le pdf Manuel de dépannage pour {nom_de_la_catégorie} Drop NUFORCE MOVE. Drop NUFORCE MOVE 3 pages.

Imprimer la page
DROP + NUFORCE MOVE BASICS - HOW MOVE SHOULD WORK
• When you first open and use Move, it will turn on and be in pairing mode when removed from
the case. Find "DROP Move" in your Bluetooth settings to pair with your device.
• When you put Move into the case, it will turn off and begin to charge.
• When you take Move out of the case, it will turn on and pair to the last device connected (if
available). If the last connected device is not detected you will need to select it from the
device you intend to use.
• Move remembers up to 8 devices that have been previously paired. This way, you can
disconnect and connect without needing to manually place Move into pairing mode.
• If you want to switch sources disconnect Move manually at the source device and then
connect manually on another source device (through the Bluetooth settings).
• You should only need to manually place Move into pairing mode when you are pairing to a
brand-new device that you have never connected to.
• If Move earpieces are paired with a device, they will remain turned on, unless placed back in
the charging case or manually turned off.
• If you do not pair the earpieces with a device, they will shut off automatically after 180 secs.
DROP + NUFORCE MOVE IEM: CONTROL GUIDE
Play/Pause
Next
Previous
Volume Up
Volume Down
Virtual Assistant
Pairing to Source
Power ON
Power OFF
DROP + NUFORCE MOVE WIRELESS IEM: LED GUIDE
LED Location
Right earpiece
Right earpiece
Right earpiece
Left earpiece
Left earpiece
Right or left earpiece
Carry case
Carry case
Function
Blinking orange
Blinking white
Alternating orange/white
Blinking white
Blinking orange
Solid orange
Solid orange
Solid white
Single tap left or right
Double tap right
Double tap left
Hold right 2 seconds
Hold left 2 seconds
Triple tap right
Hold right 4 seconds
Hold right/left 5 seconds
Hold right/left 5 seconds
LED Color/Behavior
09/2019 v.1
Command
What it Means
Not connected to a source
Connected to a source
In pairing mode
Paired to right earpiece
Not paired to right earpiece
Charging in carry case
Less than 25% battery
3 lights = 3 full charges