ELEKON BATSCANNER Manuel

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} ELEKON BATSCANNER. ELEKON BATSCANNER 2 pages.

Imprimer la page

BATSCANNER

Manual

Thank you for purchasing Elekon AG's BATSCANNER.

The BATSCANNER is an easy to use bat detector. It converts the ultrasonic bat calls into an

audible frequency with the „mixer" principle (heterodyne). What makes the BATSCANNER unique

is that the mixing frequency is adjusted and displayed automatically for the detected bat species.

Thus, the different bat species can be heard without manual tuning and its main frequency can be

seen easily.

Notes

Instructions for safe use:

Children must be supervised whilst using this product. Do not disassemble or modify

the product. Please read this manual carefully and entirely before using this product.

Warning:

The microphone and the speaker (openings) as well as the entire BATSCANNER

must be protected from rain and generally from liquids and harsh environmental

influences.

Batteries:

For the operation 3×1.5 V AAA Alkaline batteries (LR03) are placed in the battery

compartment on the back of the BATSCANNER. (Note the polarity when inserting

batteries). Old or defective batteries must be removed and disposed properly.

Depending on the battery type an operation of about 20 – 25 hours is reached.

Rechargeable batteries down to 3×1.2 V with the same size can also be used.

Sensitivity:

BATSCANNER primarily is a headphones device. If operating without headphones

indoors, in cars, near electronic devices or close to surfaces, etc. at high volume a

feedback loop through the speaker can occur. This is expressed in whistling noise.

Because of the automatic frequency adjustment of the BATSCANNER such effects

can not be suppressed completely without reducing the sensitivity. Remedy: use in

"free" environment (distance from obstacles) and possibly take back the volume or

use headphones.

Package Contents

• BATSCANNER device incl. 3×1.5 V AAA batteries

• Wrist strap

• This manual

Features

• Detects bat calls automatically and tunes frequency accordingly

• Speaker or headphones operation

• Optional manual frequency tuning

3.5mm Jack for headphones

• Automatic muting when no activity (Squelch)

Microphone

• Can be used with regular or rechargeable batteries

Display

Using BATSCANNER

Button

1. (optional) Plug in the headphones for better sensing.

2. Power on the device by pressing the

–

Button

3. The device goes into automatic mode and sets the initial frequency to 48kHz. The device

Button

now listens to incoming bat calls and adjusts the frequency accordingly. The bat calls are

transformed into audible range and output to headphones or speaker.

Speaker

4. Press the

5. If no button is pressed for >30min. the device turns off to save battery.

Switching modes

1. Press the + and – button simultaneously to toggle between automatic and manual mode.

2. The current mode is displayed by the left LED bar.

5.1

Automatic mode

The mixing frequency is adjusted and displayed automatically for the detected bat species. Thus,

the different bat species can be heard without manual tuning and its main frequency can be seen

easily.

Elekon AG

1. Use the + and – buttons to increase or decrease the volume.

Cheerstrasse 16

2. Press the

CH-6014 Luzern

www.batscanner.ch

5.2

Manual mode

The mixing frequency can be adjusted manually. Only bat species in the set frequency range can

be heard.

1. Use the + and – buttons to increase or decrease the frequency.

2. Press the

3. To change the volume, switch to automatic mode first.

Check batteries

Battery voltage has to be 2.5 – 4.5 V.

Please note: If using rechargeable batteries, the operation time may be shorter.

1. BATSCANNER is switched off.

2. Press and hold the

Change options

For special use cases it may be needed to change device options:

Auto off ():

•

Lower frequency limit ():

•

Upper frequency limit ():

•

Squelch ():

•

1. BATSCANNER is switched off.

2. Press and hold the

3. Use the + and – buttons to change the auto off option ().

4. Press the

5. Use the + and – buttons to increase or decrease the lower frequency limit value (kHz).

6. Press the

7. Use the + and – buttons to increase or decrease the upper frequency limit value (kHz).

8. Press the

9. Use the + and – buttons to increase or decrease the squelch value (s).

10.Press the

-Button ().

-Button for >1s to switch off the device ().

-Button to reset the frequency to 48kHz.

-button to reset the frequency to 48kHz.

-Button for >3s to display the actual battery voltage (.).

Enable ()/Disable () 30min auto off timer

Lower frequency limit of automatic detection in kHz

Upper frequency limit of automatic detection in kHz

Auto muting after n seconds, 0 is off

and the + buttons for >3s to enter options mode ().

-Button to switch to the lower frequency limit () option.

-Button to switch to the squelch () option.

-Button to store the options (). The device turns off.