DROPSA 1524344 Series Manuel d'utilisation et d'entretien - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} DROPSA 1524344 Series. DROPSA 1524344 Series 8 pages. Pneumatic pumps for grease
Imprimer la page
1. INTRODUCTION
This operating and maintenance manual refers to the pumping system with part number 1524175.
The most recent version can be obtained by requesting it from the Sales Technical Office or online at
http://www.dropsa.com.
This operation and maintenance manual contains important information for the health and safety protection of the
personnel who intends to use this equipment.
This manual must be read carefully and kept so that it is always available to the operators who want to consult it.
2. GENERAL DESCRIPTION
Sturdy construction and highly reliable pump made up of a pneumatic motor and a pumping rod with steel piston. Comes
with: grease gun, follower plate and barrel cover.
They can be used in all types of industries as lubrication pumps, reservoir filling pumps and decanting pumps. They come
with hose and spray gun and are used to fill lubricators or small reservoirs.
3. IDENTIFYING THE MACHINE
A label is located on the pump pneumatic motor and bears the product code.
4. TECHNICAL CHARACTERISTICS
Pump code
compression ratio
noise
max grease output pressure
operating pressure
flow rate
pumping rod length
pumping rod external diameter
drums
1524344
50:1
75 dB
400 bar (5880 psi)
Min. 4 - Max. 8 bar (58 –117 psi)
700 gr./min.
480 mm (18/9 in.)
28 mm (1.1 in.)
20 kg (44 lb)
2