Elektor TAPIR Manuel de construction - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de construction pour {nom_de_la_catégorie} Elektor TAPIR. Elektor TAPIR 15 pages. E-smog detector kit
Également pour Elektor TAPIR : Manuel de construction (9 pages)

Imprimer la page

5 – Assembly

Start by soldering the switch onto PCB 2 and the panel mount connector

for the headset onto PCB 4. Apply solder sparingly. Then remove these

two PCBs from the PCB panel and file off the tabs.

Figure 7. Bottom view of PCB breakout Panel 120354-1 v2.2

for the TAPIR E-Smog Detector.

Figure 8. Slide switch S1 and headphones connector K2 soldered.

Elektor "TAPIR" E-Smog Tester Kit | Construction Manual

7/15