DROPSA 999525 Manuel d'utilisation et d'entretien - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} DROPSA 999525. DROPSA 999525 15 pages.
Imprimer la page
5.
MACHINE COMPONENTS
The pump is made up of a series of components:
CHARACTERISTICS
Fixed flow rate pump element
Piston diam. 6 mm.
Piston diam. 8 mm.
Variable flow rate pump element
Piston diam. 6 mm:
Piston diam. 8 mm.
Maximum pressure - bar
(MPa)
Tank capacity
Characteristics of the mineral lubricant
Temperature of use
For operations outside of this range
Variable flow rate model:
AC Motor
(specify if single or 3 phase)
DC Motor
Fixed flow rate model:
AC Motor
(specify if single or 3 phase)
DC Motor
Insulation
*Value refers to pumps with 8.5 cm ³ / min capacities
5.1 Minimum level indicator
Electro-mechanical type
Normally closed at minimum level;
maximum commutable power ISA;
maximum commutable voltage 220/250 VAC.
Lubricant maximum level and reserve indicator is available on request: fitted with floats and two switches (minimum
and zero)
5.2 Pressure gauge (Accessory)
Two types of pressure gauge are available:
PART N°
299196
291395
5.3 Pressure regulator (Accessory)
Three types of regulator (valves) are available to protect the system from overpressures.
PART N°
299450
299451
299452
WARNING: Pay strict attention to what is indicated on the valves when assembling. Incorrect assembly of the
regulator (valve) can result in an overpressure which could prejudice the correct functioning of the pump itself and
be dangerous for the user.
4
PUMP 999
Electric piston pump
0.20 cc/stroke
0.35 cc/stroke
from 0.028 to 0.20 cc/stroke
from 0.05 to 0.35 cc/stroke
*450 (45)
3 – 5 – 10 - 30
oil:
min. 15 CSt
grease:
max. NLGI 2
-
5C - + 40 C
Consult Engineering Dept
Dropsa
220-380 V 50/60 Hz
at 1500 rpm
24V at 2200 rpm
220-380 V 50/60 Hz at 1500 rpm
24V at 2200 rpm
Class F
PRESSURE RANGE
0
500 bar (0
50 MPa)
PRESSURE RANGE
0 250 bar (0.25 MPa)
0 350 bar (0.35 MPa)
50 450 bar (5.80 MPa)