Daikin Madoka BRC1H82K Manuel d'installation et d'utilisation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Daikin Madoka BRC1H82K. Daikin Madoka BRC1H82K 12 pages. Wired remote controller
Imprimer la page
10 Starting up the system
NOTICE
Be careful not to distort the rear casing by overtightening
the mounting screws.
9.2
Connecting the electrical wiring
NOTICE
The wiring for connection is NOT included.
NOTICE
When wiring, run the wiring away from the power supply
wiring in order to avoid receiving electric noise (external
noise).
9.2.1
To connect the electrical wiring
Connect controller terminals P1/P2 to indoor unit terminals P1/P2.
From the top
From the rear
From the left
Installation and operation manual
10
P1P2
P1P2
P1P2
From the bottom
P1P2
9.3
Closing the controller
CAUTION
NEVER touch the internal parts of the controller.
CAUTION
When closing the controller, be careful not to pinch the
wiring.
NOTICE
To prevent damage, make sure the front of the controller is
clicked into the rear casing securely.
9.3.1
To close the controller
1 Click the front of the controller into the rear casing.
10
Starting up the system
The controller gets its power from the indoor unit. It will start up as
soon as it is connected. For the controller to be operable, make sure
the indoor unit is powered on.
Once the controller is powered, it will automatically start up. If it is
the first and only controller that is connected to the indoor unit, it will
automatically get designated as a "Normal" master controller.
INFORMATION
For more information on how to designate the controller to
be of a different type (i.e. operable in "Normal", "Alarm
only", or "Supervisor" mode, as master controller or as
slave controller), see the installer and user reference
guide.
BRC1H82W+K+S
Madoka wired remote controller
4P596265-1D – 2022.02