AnkerWork BR300 USB Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AnkerWork BR300 USB. AnkerWork BR300 USB 19 pages. Video conference bar

Imprimer la page

Preparing the Remote

1. Press to open the battery cover.

2. Insert two new AAA batteries (not included) matching the polarity (+/-) indicated, and close the battery cover.

EN 08

Pairing the Remote with Video Bar

• Your remote is already paired with the video bar and ready for use when powered on.

• You may need to manually pair a remote with the video bar when replacing a lost remote or experiencing any control

problems.

1. Turn on the video bar and make sure that you can see an image output.

2. Press and hold

and

until the LED on the remote turns solid red. This indicates that the pairing history has been cleared.

3. Insert a paper clip (not included) into the reset key and push gently. The LEDs on the video bar will light up blue in a

sequence during the pairing process.

4. Press and hold

until the LEDs on the video bar flash blue. This indicates that pairing is completed.

09 EN