DROPSA ADVANCED LUBRICATION CONTROLLER Fiche d'instruction et de données produit - Page 2
Parcourez en ligne ou téléchargez le pdf Fiche d'instruction et de données produit pour {nom_de_la_catégorie} DROPSA ADVANCED LUBRICATION CONTROLLER. DROPSA ADVANCED LUBRICATION CONTROLLER 4 pages. With quick remote configuration
Imprimer la page
MENU OPERATION:
System Menu
The System Menu is used to configure the type of pump and
Lubrication System that is connected to the Controller
To access the System Menu press the UP and DOWN buttons together and hold for two seconds.
Screen
Parameter
Display
Pump Type.
Press the MODE button to go to the next option.
Lubrication
System Type
Press the MODE button to go to the next option.
Pause
Interval
Selection
Operator Menu:
The Operator Menu is used to adjust the
Pump ON' cycle and the (timer/impulse) pause interval.
To access the Operator Menu press and hold the MODE button for two seconds.
Parameters
Screen
Display
Pump On
Time
Pause Timer
or
Impulse
Counter
Press the MODE button and
hold for two seconds.
2
Description
The Pump receives a 4
second ON and a 4 second
OFF pulse
The Pump receives a constant
signal.
Progressive System - Monitors
switch on progressive divider.
Monitors a pressure switch on
Single Line Systems.
No monitoring, just timer.
The Pause between the Pump
ON cycle is determined by a
timer.
The Pause between Pump
cycles is determined by the
cycle switch input connected
to pulse
Description
Indicates the Minimum Pump
ON time.
Exit and go the next option.
Indicates Pause Interval.
Indicates number of impulses
between cycles.
Return to normal operating
mode
Operation
Press the UP button to switch
between the two options.
Press the UP button to switch
between the three options.
Press the UP button to switch
between the three options.
Operation
Use the UP and DOWN
buttons to adjust the setting.
Press the MODE button and
hold for two seconds.
Use the UP and DOWN
buttons to adjust the setting.
'VIP' ADVANCED LUBRICATION CONTROLLER