anko AD-HJ33 Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} anko AD-HJ33. anko AD-HJ33 7 pages.

⚫ If high temperatures are required for your cooking needs it is best to introduce the heat slowly by

preheating the wok on a medium setting for a few minutes before turning the heat up further.

⚫ The use of the plastic or wooden utensils will prolong the life of the non-stick coating metal utensils

will damage the surface.

⚫ Only lift up the unit with the handle.

Clean your wok

⚫ Remove plug and controller from the power outlet before cleaning.

⚫ To clean the non-stick surface, turn the temperature control to the "0" setting, switch the power off at

the power outlet, unplug the cord and remove the temperature controller from the wok.

CAUTION: the controller may be hot after use, in particular the metal probe, take care when removing it.

⚫ Allow the appliance to cool down completely before cleaning or storing.

⚫ NEVER PUT COLD WATER INTO A HOT WOK as this may cause the body to buckle due to sudden

change in temperature.

⚫ For electrical safety, never IMMERSE THE TEMPERATURE CONTROL PROBE, CORD OR

PLUG IN WATER OR LIQUID.

⚫ Cleaning should be performed after every cooking.

⚫ Wash the non-stick surface with clean warm water and mild detergent after each use.

⚫ If you do not clean the wok after use, it will result in a build-up of food residue, making it difficult to

clean later. The build -up will also cause damage to the non-stick surface.

⚫ Do not use steel wool products or scouring pads on the non-stick surface.

⚫ To remove stubborn food residue, use a plastic mesh pad, or other available products that state they

are safe to use on non-stick surfaces.

⚫ To clean the glass lid, wash it in warm soapy water, rinse with clean water and dry. Do not use metal

(or other abrasive) cleansers.

⚫ Do Not leave plastic or wooden utensils in the wok while it is hot.

⚫ Do Not place the appliance, controller or lid in the dishwasher.

Store the unit

⚫ Store the Temperature Control Probe carefully. Do not knock or drop it because the probe may be

damaged.

⚫ For convenient storage, line the Wok Bowl with two sheets of dry towel and place the probe on the

towels. This will ensure the probe and plug don't scratch the non-stick coating.

TECHNICAL SPECIFICATIONS

Voltage: 220-240V~ 50-60Hz

Power: 1500W