anko KY-509 Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} anko KY-509. anko KY-509 12 pages.

Fitting handle to frying basket

1. Squeezing the handle wires to pass

through the ring, then insert the ends

of handle wires through the two holes

in the basket

CLEANING

1. Unplug the appliance and let it cool down before cleaning.

2. Clean the cooker after every use.

3. Remove the inner pot. Wash it in warm soapy water with a non-abrasive sponge. Rinse and dry

thoroughly. Replace it into the base unit after cleaning.

4. Clean the lid with detergent and rinse with fresh water. Wipe all parts dry with a soft cloth. Wipe the

housing with a moistened cloth. Ensure that no water can enter the housing. Wipe the housing dry with

a soft cloth.

CAUTION: To prevent damage to the appliance do not use alkaline cleaning agents when cleaning, use

a soft cloth and a mild detergent.

STORAGE

1. Always unplug the removable power cord and allow the unit to cool down before storage.

2. Place the accessories (i.e. frying basket, steam rack and slotted spoons) inside the inner pot.

3. Always store the Multi Cooker in an upright position.

4. Do not place anything on top of the Multi cooker.

TECHNICAL DATA

MODLE

KY-509

2. Carefully lower the handle to reach

two holes on basket. Twist handle left

and right to ensure it locks securely

into place.

POWER SUPPLY

220-240V 50-60Hz

POWER

1300W