anko LD-K1047 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} anko LD-K1047. anko LD-K1047 9 pages. Cordless tea maker

IMPORTANT! To prevent damage to the exterior

* Do not use caustic, aggressive or abrasive cleaning products for cleaning the kettle exterior.

Cleaning

• Remove the supply cord plug from the mains power outlet socket and let the water kettle

cool down completely.

• Wipe the base and power cord with a dry cloth.

• Wipe the outside of the jug with a slightly moistened cloth.

• Pull the filter out of the spout and rinse it under running hot water.

• Slide the filter back into the spout as far as it will go.

Descaling

IMPORTANT! During the below process, DO NOT fill the tea maker more than the MIN (0.5L)

mark on the tea maker. Filling above the MIN mark will cause overboiling and spillage out of the

spout.

The tea maker must be descaled at regular intervals, especially if the power base is visibly

encrusted with lime scale. Regular descaling saves energy and increases the service life of the

kettle.

We recommend using a three-to-one (3:1) solution of water and vinegar or citric acid to descale

the kettle.

Note: Make the mixture in a separate container and then pour into the tea maker up to the

MIN (0.5L) mark.

1. Let the solution soak in the tea maker for about an hour, and then bring it to the boil.

2. Discard the water and thoroughly rinse out the tea maker with fresh water.

Alternatively, you may use a commercially available kettle cleaning solution from the

supermarket. Please follow the instructions provided with the cleaning solution.