anko HEG LF-02 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} anko HEG LF-02. anko HEG LF-02 12 pages. 85cm floor standing bladeless fan

Imprimer la page
anko HEG LF-02 Manuel de l'utilisateur
Do Not mix new and old batteries, or batteries of different types (e.g., Alkaline with Non-
Alkaline) in the remote control.
To prevent corrosion, remove the batteries if the remote control will not be used over a
lengthy period.
Point the Remote Control at the control panel as this is the location of the receiver, then
press your desired button.
Important: Always operate the product on a flat, level, steady, and stable surface to
avoid it overturning.
4.2

Fan Only

Insert the plug into a standard electrical power point and switch on at the power
•
point.
Note: The first time you connect to the power, a single Beep sound will be heard,
and the small indictor light next to the "On/Off" symbol will illuminate Red colour
indicating the unit is powered.
Press the On/Off button on the control panel, or the
control to turn the fan on.
•
The Fan will briefly start with "Medium" fan level and will then switch to
"Low" Fan speed and "Normal" fan mode. This is the default setting.
To increase the fan speed, press the "Speed" button on the control panel,
•
or the
button on the remote control and the fan will increase speed to
the "Medium" setting.
•
Press the speed button on the control panel, or the
remote control again, and the fan will increase to "High" fan setting.
•
Press the speed button on the control panel, or the
remote control again, and the fan will increase to "MAX" fan setting.
Press the speed button on the control panel, or the
•
again, and the speed will cycle back around to "Low" fan speed.
To Turn Off, press the On/Off button on the control panel, or the
remote control.
Page 8 of 12
button on the remote
button on the
button on the
button on the remote control
button on the