anko KE01312-SA Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} anko KE01312-SA. anko KE01312-SA 7 pages. Cordless water kettle

Imprimer la page

3. Position the kettle on the power base.

4. Connect the cord plug into a mains power outlet. Press down the switch and the

indicator will light up, and then the kettle starts to boil the water. The kettle will switch

OFF automatically once the water has boiled. If necessary to re-boil

wait for 30 seconds

before pressing the switch again to re-boil the water. You may shut OFF the power by

lifting switch up or directly lift the kettle from the power base at any time to stop the

boiling process.

NOTE: Ensure that switch is free of obstructions and the lid is firmly closed, the kettle

will not turn OFF if the switch is constrained or if the lid is open.

5. Lift the kettle from the power base and then pour the water.

NOTE: Operate carefully when pouring the water from your kettle as boiling water may

result in scalding, besides, don't open the lid while the water in the kettle is hot.

6. The kettle will not re-boil until the switch is pressed again. The empty kettle may be

stored on the power base when not in use.

NOTE: Always disconnect from mains power when not use.

BOIL-DRY PROTECTION

Should you accidentally let the kettle operate without water, the function of boil-dry

protection will automatically switch OFF power to the heating element. If this occurs,

allow the kettle to cool down prior to filling with cold water before re-boiling.

CLEANING AND MAINTENANCE

Always disconnect the kettle from mains power and allow it to cool down completely

before cleaning.

1. Never immerse the kettle, power cord or power base in water, or allow moisture to

contact with these parts.

2. Wipe the appearance of body with a damp cloth or cleaner, never use a harsh or abrasive

cleaner.

3. Remember to clean the filter at intervals. For easier cleaning, detach the filter by

pressing down the tab of filter inside the kettle and then replace it after cleaning.

CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to clean the outside

of the kettle to prevent the gloss loss.

4. When not use or during storage, the power cord may be wind under the bottom of kettle.