anko LD-K3064 Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} anko LD-K3064. anko LD-K3064 9 pages.
* Furniture today is often coated with a wide range of varnishes and plastics and is treated with
various protective substances. Some of these products may contain substances that react
adversely with the rubber feet on the power base, soften them and cause staining on the
surface. Therefore, we recommend placing a non-slip mat under the rubber feet of the kettle.
Unpacking
DANGER to children- danger to life due to suffocation/swallowing
Keep the packing material out of children's reach. Dispose of it immediately.
* Carefully remove all parts from the packaging and check that no parts are missing or possibly damaged.
* Remove all packaging material.
First time use
IMPORTANT! During the below process DO NOT fill the kettle more than the Min. (0.5L) mark
on the kettle. Filling above the Min. mark will cause overboiling and spillage out of the spout.
To ensure a long service-life of the water kettle, proceed as follows before using it for the first
time:
1. Fill the kettle with water and add vinegar in a ratio of 1:3 (1 part vinegar / 3 parts water).
Note: Make the mixture in a separate container and then pour into the kettle up to the Min. (0.5L) mark
only.
2. Bring to a boil (see Boiling water), then pour away.
3. Allow the kettle to cool down and then refill it fresh water. Boil the water and then pour it away.
To avoid scale deposits, descale the water kettle at regular intervals (after about every
15th use) as described in the section "Descaling".
Boiling water
WARNING: Risk of scalding from hot water & steam
* The kettle and its lid become hot while in use. Do not touch them.
* The lid must be tightly closed during the boiling process. It must not be opened while pouring
out water. Allow the appliance cool down before opening the lid.
* Do not fill the water container with less than Min. (0.5L) or more than Max. (1.7L) of water.
--USE—