anko LD-K9030 Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} anko LD-K9030. anko LD-K9030 10 pages.
* Never leave the appliance unattended while in use.
* Keep the appliance and mains cord away from sources of heat such as cooking plates or
open gas flames. This could cause melting.
* Keep the mains power cord away from sharp work surface or edges to prevent damage to the
power cord.
* Unplug the kettle from mains power, ...
... if an abnormality occurs during use,
... if you are not going to use it for a prolonged period,
... during thunderstorms and
... before cleaning it.
When doing so, always pull from the plug, not from the mains cord.
* Do not use the appliance if the kettle, base or mains cord show any visible sign of damage.
* Do not make any modifications to the appliance and its mains cord or change the connection
cable yourself.
Warning - risk of burns / scalding
* Always place the water kettle on a solid and even surface.
Ensure that it cannot slip or be dropped and that the power cord does not hang down.
* The kettle becomes hot while in use. Do not move the kettle during operation and do not pull
on the mains cord. Only hold/lift the hot kettle by its handle.
* Contact with rising steam can cause scalding! Make sure the lid is always firmly closed and
do not open it while water is boiling or while pouring water out.
* Do not fill the container with less than Min. (0.5L) or more than Max. (1.7L) of water.
If there is not enough water in the kettle, the appliance may overheat and malfunction.
* Be sure that the kettle is switched OFF before taking it off the power base.
* The kettle is only to be used with the stand provided.
* If the kettle is overfilled, boiling water may be ejected.
* CAUTION! The heating element and surfaces are subject to residual heat after use.
* WARNING – Avoid water spillage on the electrical connectors.
* WARNING – Potential injury from misuse.
* WARNING – Do not remove the lid whilst water is boiling.