anko LD-T7037 Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} anko LD-T7037. anko LD-T7037 7 pages.

USING YOUR TOASTER

Important: Never let the toaster operate unattended.

Important: Do not operate the toaster without the crumb tray.

Toasting

1. Unwind the power cable to the required length and plug it in.

2. Use the time knob to set the required toasting level between 1 and 6. For a

medium, golden brown select level 3.

3. Place the food to be toasted in the toasting slot.

4. Press the Push-down lever down until it engages. The LED on the Cancel

button will light up.

5. Toasting ends when the food being toasted is raised up. The LED on the Cancel

button will go out.

Note: The toasting can be interrupted at any time by pressing the Cancel button.

Never lift the Push-down lever to cancel toasting.

Tip: If you toast only one slice, set the toasting level lower than for two slices.

Reheating cold bread or toast

1. Insert the cold bread to be toasted.

2. Press the push-down lever down until it engages. The LED on the Cancel button

will light up.

3. Press the Reheat button. The LED on the Reheat button will light up.

Toasting frozen bread

1. Use the time knob to set the required toasting level between 1 and 6.

2. Insert the frozen bread to be toasted.

3. Press the push-down lever down until it engages. The LED on the Cancel

button will light up.

4. Press the Defrost button. The LED on the Defrost button will light up.

CAUTION

1. Remove all protective wrappings on the toaster prior to toasting.

2. If toaster starts to smoke, Press Cancel to stop toasting immediately.

3. Avoid toasting the food with extremely runny ingredients such as butter, jam etc.

4. Never attempt to remove bread jammed in the slots without unplugging the

toaster from the mains power outlet first. Be sure not to damage the internal

mechanism or heating elements when removing bread.

5. The bread slot is for toasting of regular bread slice.

6. To achieve a uniform toast colour we recommend that you wait a minimum of

30s between each toasting time so that browning colour control can reset