anko M3C-D Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} anko M3C-D. anko M3C-D 16 pages. Robotic vacuum cleaner

Note: Remote control require 2x AAA batteries (not included)

To install the batteries, first remove the battery cover on the remote control by sliding the

battery cover back. Install the batteries in correct polarity inside the battery compartment

matching the polarity shown and then refit the battery compartment cover securely.

Battery type: "1.5V 2x AAA". Alkaline batteries recommended.

To prevent overheating DO NOT mix new and old batteries in the remote control.

To prevent corrosion, remove the batteries if the remote control is not used for a long period of

time.

OPERATION



Before first use, charge the vacuum cleaner for 12 hours.



When Start/Pause indicator glows with steady white light, it indicates the device is fully

charged. Short press

vacuum will start auto cleaning.



To change cleaning mode, press

cleaning mode button to restart cleaning.



To turn the vacuum cleaner off, initially pause the cleaning then press and hold the

button on device for 4 seconds. The charge Home indicator will flash red four

times and the robot vacuum will shut down.

Cleaning mode

Spot Cleaning

The vacuum intensively cleans a specific area in a spiral

pattern, useful if there is a concentrated area of dust or

debris. When in the Spot Cleaning mode, the vacuum will

stop cleaning after 1 minute.

button on device or press

to pause the operation, then press desired

button on remote control,