anko SL163E Manuel - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} anko SL163E. anko SL163E 20 pages.

To refit the dust canister lower clear section, line up the tab on the side

•

of the lid with the Open padlock symbol on the dust canister, push the

top and bottom canister components together then rotate the dust

canister lower clear section clockwise until it locks in place and the tab

is located above to locked padlock symbol as shown.

Close the dust canister trap door and clip shut.

•

To refit the Dust Canister in to the vacuum cleaner, simply align the

•

dust canister into its position and push down until it locks in place.

14 User Maintenance

WARNING: The plug must be removed from the power socket before any

maintenance, cleaning or replacement of parts.

NOTE: To maximise the performance of your vacuum cleaner, you should

clean your filters regularly.

If the filters are broken or worn, replace them before continuing to use the

vacuum.

Filters can be purchased from our Customer Service. You can call our

customer service number: 1300 105 888 or via email [email protected]

Important Note – the Filters must be cleaned regularly for best suction

performance and to prevent over-heating and damage to your vacuum

cleaner.

Cleaning is best done at the same time when emptying the dust Canister

after you have finish vacuuming for the day.

Page 14 of 20