anko 42764717 Manuel de l'utilisateur - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} anko 42764717. anko 42764717 4 pages. Bluetooth port speaker barrel
1 Power On/OFF switch
2 DC 5V USB charge port
3 TF card slot
4 USB port for USB flash drive
5 AUX port (AUX cable included)
Charging:
The speakers are powered via an integrated rechargeable battery. The battery cannot be removed or replaced.
Upon initial use, the battery should be charged fully to ensure optimal performance and battery life.
Charge the device with the included USB charging cable.
Plug the micro USB end of the charging cable into the DC 5V USB charge port (2) and the
USB end into a suitable USB port on your computer or a USB wall charger with DC5V.
Charging time approx. 4 hours, when connected to a standard USB port.
Power On/Off
1. To turn the unit on, push the Power On/OFF switch (1) to ON. The blue LED will light up and
a sound is emitted.
2. Turn the unit off, push the Power On/OFF switch (1) to OFF. The LED will switch off.
Pairing a Bluetooth device for the first time
1. Turn the unit on.
2. Turn on your external device. Refer to its user manual for instructions on pairing and
connecting Bluetooth devices.
3. Using the native controls on your Bluetooth device, select Bluetooth device name
'KM42764717 in your Bluetooth settings menu to pair.
4. When successfully paired and connected, a sound will issue from the unit.
After initial pairing, the unit will stay paired unless unpaired manually by the user.
5. If your device asks for a password, use "0000" or "1234" to complete the pairing
Process
If you have used Bluetooth connection before, the system will start searching for the device
last connected. When the device is found, the system will re-connect automatically.
NOTE: Only one Bluetooth device can be connected to the speakers at one time.
When Aux in is connected, Bluetooth function will be switched off,please disconnect the Aux in cable before
using Bluetooth.
NOTE:
Should your device become unpaired or you are not able to connect it, repeat the above steps.