anko BL1703A-SA Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} anko BL1703A-SA. anko BL1703A-SA 9 pages.

Electrical Specification

Voltage

Frequency

220-240V

50-60Hz

220-240V

50-60Hz

1. Before first use, unpack the appliance and place all parts on a horizontal surface.

2. Ensure the Speed Selector to "OFF" Position, then plug into power outlet and set

Speed Selector to your desired setting. You can press down on the Pulse or Ice crush

button （See Fig. 2） without releasing if required to accelerate the process of blending.

NOTE: Make sure the jar cover is placed in position properly before operating, and

never open the jar cover during operation.

3. Once all pieces have been cleaned and dried thoroughly, reassemble the jar.

1) Invert the jar onto a flat surface. Holding the jar handle, put the blade assembly onto

the jar base bottom and secure the blade assembly by turning it clockwise until tight（See

Fig.3）

2) Re-position the jar assembly with its opening upwards. Wrap the seal ring around the

lid bottom and put the lid onto the jar assembly. Place the measure cup exactly into the lid

by fitting the small projection on the both sides of the cup into the slots of the lid and

turning the cup clockwise until tight（See Fig.4）

3) Finally, place the assembled jar onto the motor unit by aligning the arrow on the

assembled jar bottom and motor unit.

CAUTION: The jar and jar base are now secured. To prevent damage, do not try to

twist the jar and jar base onto motor unit.

Fig. 3

Power

Function

700W

Pulse/blend

700W

Ice crush

Operating

Time

1 minute

3 seconds

Fig. 4

Rest period

Capacity

Min. 2 minutes

1500ml

Min. 3 seconds

Max

150g