anko WBL-005 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} anko WBL-005. anko WBL-005 10 pages.

USE YOUR BLENDER

WARNING! DO NOT process boiling liquids or hot ingredients. Allow hot ingredients to cool down

before placing them in the cup.

IMPORTANT! DO NOT fill the cup above the maximum level as indicated on the cup. Some

mixtures increase in volume during blending and create pressure in the jug.

1. Ensure the product is unplugged from the electrical outlet.

2. Pour liquid ingredients into the cup, wash all solid ingredients and cut them into small pieces, and put

into the cup.

NOTE: Do not overfill! To avoid spilling, do not add ingredients past the "Max" fill line.

3. Screw the blade assembly on the jug tightly and ensure it is not leaking. Align the tabs on the cup with

the motor base, then push into the motor base and rotate clockwise until you hear "click" sound.

4. Plug the product into a standard 220-240V~ electrical outlet, and the appliance will start working.

WARNING: Do not operate the motor continuously for more than 1 minute at a time. Allow the

motor to rest for 3 minutes before continuing.

If the appliance stop working during use, unplug the appliance and let it cool down for 6 to 10

minutes, then the appliance should be ready again for use.

NOTE: If the blades are not operating smoothly, stop the product and add some liquid, or reduce the

contents in the cup.

Tip: If you want to use ice crush function, align the tabs on the jug with the motor base push down and

turn clockwise to activate the blender and counterclockwise to stop the blending process. For best result

use ice cubes straight from the freezer. Try using short operating time instead of a longer time.

5. When you have reached your desired consistency, stop the appliance by turning the cup

counterclockwise and take it straight up to remove.

6. Disassemble the cup from the blade assembly.

7. Twist the lip ring onto the cup and enjoy your drinks directly from the cup!

8. Make sure that the motor base is unplugged when not in use.

NOTE: The blender has a built-in safety lock feature, this ensures that you can only switch ON the

appliance while the cup and the blade assembly are assembled on the motor base securely.

IMPORTANT: On the blade base collar, there is a silicone gasket seal that creates an airtight fit

with the cup to prevent liquid from leaking. After washing and before each use, always check to

make sure the gasket is properly in place.

WARNING! To prevent the appliance from overheating, dry ingredients must not be processed.